Properties | Test Method | Test Conditions | Unit | Test Value |
Specific gravity | ASTM D-792 | 23°C | g/cm3 | 1.27 |
Flow coefficient | ASTM D-1238 | 190°C/2.16K | g/10min | 10-30 |
Tensile strength | ASTM D-638 | 23°C,50mm/min | Kgf/cm2 | 680 |
Elongation | ASTM D-638 | 23°C,50mm/min | % | 12.5 |
Izod Impact Strength | ASTM D-256 | 23°C,Notched 1/8” | Kg-cm/cm | 8.5 |
Bending strength | ASTM D-790 | 23°C,15mm/min | Kgf/cm2 | 620-650 |
Heat distortion
temperature |
ASTM D-648 | 1820kpa | °C | 70 |
PLA raw material is a biodegradable material ,a great fiber do good to humen.(in the composting conditions, broken down into carbon dioxide and water).
Injection molding applications can include cutlery, cups, plates, cosmetics and outdoor novelties.This special fiber be used to iinjection molding application and extruding application.
Packaging:1kg/bag,25kg/bag or as your requirements
Shipping:It can be according to the customer’s request
Normal temperature preservation